Audio-Technica ATH-SR30BT Ear Pads – Soft PU Leather Replacement
🎧 Fresh PU Leather Ear Pads for Your Audio-Technica ATH-SR30BT
When the surface of your ear pads starts to peel and the foam goes flat, even a great pair of headphones feels tired. These replacement ear cushions for the Audio-Technica ATH-SR30BT bring back a soft, even contact with your ears. Made in PU leather, they fit by hand in a few minutes, no tools needed.
Sold as a pair (left + right).
🎧 ATH-SR30BT | 🧵 PU leather | ☁️ Soft cushioning | 🔧 No tools | 📦 1 pair (L + R)
⚡ Ordered in 30 seconds
- Check your model: Audio-Technica ATH-SR30BT.
- Add the pair to your cart and check out.
- Swap them in: peel off the old pads, press on the new ones, done.
📑 On this page
⭐ Why Replace the Ear Pads on Your ATH-SR30BT
Your ear pads (also called ear cushions or earpads) sit against your skin every time you listen. Heat, sweat and daily handling slowly wear down the covering, and the foam underneath loses its bounce. The headphones start to press unevenly, slip, or feel warm and sticky, even though everything else still works.
Replacing just this one wear part is quick, affordable, and often all it takes to make them comfortable again.
Looking for Audio-Technica ATH-SR30BT ear pads, ATH-SR30BT replacement ear cushions or ATH-SR30BT earpads? You're in the right place.
🎧 Made for the SR30BT
Replacement ear pads for this Audio-Technica model.
🧵 PU leather
A smooth surface that wipes clean.
☁️ Soft cushioning
A gentle feel against your ears.
📐 Even pressure
Left and right feel the same again.
🧼 Fresh surface
A cleaner contact than worn pads.
🔧 No tools
Fit them by hand in minutes.
📦 Full pair
Left and right in every order.
♻️ Keep your headphones
A fraction of the cost of a new pair.
📖 Ear Pads, Ear Cushions, Earpads: Same Part, Different Names
People use several names for it, but on your Audio-Technica ATH-SR30BT they all mean the same thing: the padded piece that rests against your ears.
🧵 What You Get: PU Leather Ear Pads
These ear pads are made in PU leather, the one material offered for this model. Here is what that means day to day.
✅ The upsides
- A quick wipe keeps the surface clean.
- Handy if you sweat or share your headphones.
- A smooth, uniform look.
💡 Good to know
- PU leather can feel warmer during long sessions.
- Material and thickness can slightly color the sound.
- Skip solvents and strong alcohol when cleaning.
🩺 How to Tell Your Ear Pads Are Worn Out
🩹 Peeling surface
Cracks, flakes or loose patches.
📉 Flat foam
It no longer springs back.
😣 Sore ears
Discomfort arrives sooner than it used to.
↔️ Slipping headphones
They shift whenever you move.
🧽 Sticky feel
Sweat has marked the surface.
👃 Lingering smell
It returns even after cleaning.
🧪 The 3-step test
- Press: a dent that stays, or foam that bottoms out, means it's done.
- Touch: a rough, sticky or peeling surface is a warning sign.
- Look at the edges: torn seams and gaps confirm the wear.
📌 Compatibility: Audio-Technica ATH-SR30BT
These are compatible replacement ear pads (not original) for the Audio-Technica ATH-SR30BT. Audio-Technica makes many headphones with similar names, and their ear pads are not always the same, so confirm your exact model before ordering.
- Headphone model: Audio-Technica ATH-SR30BT
- Material: PU leather
- Type: compatible replacement ear pads (not original)
⚠️ This page is only for the ATH-SR30BT. For another Audio-Technica model, open that model's page.
Have a different Audio-Technica model?
Each model has its own ear pads. You may find yours here:
How to find your model name
- On the headphones: the name is often printed on the headband or inside an ear cup.
- On the box or manual: the full model name is listed there.
- In your order history or receipt: you'll find the model you bought.
🔊 Fit, Comfort and Sound: What to Expect
New ear pads restore an even contact around your ears. The headphones sit more naturally and stay more comfortable than they do on flattened foam.
- Results depend on your head shape, any glasses you wear, and how you wear the headphones.
- Material and thickness can slightly color the sound, so small differences from your old pads are possible.
- Ear pads are wear parts: they don't change the drivers, the Bluetooth, the battery, the microphone or the electronics.
👤 Who Are These Ear Pads For?
🎶 Music lovers
Long listening, without sore ears.
🚆 Daily commuters
Headphones that stay comfy on the go.
💻 Remote workers
A steady fit through a full workday.
🏋️ Active listeners
Easy to wipe clean after a sweaty session.
🎁 Second-hand headphones
Start again with fresh pads.
🧼 Hygiene-minded users
A clean contact surface.
🌱 Repair fans
Repair instead of replacing.
🔧 Installation: Replace Your Ear Pads in 8 Steps
- Turn the headphones off and lay them on a clean surface.
- Note left and right before removing anything.
- Peel off the old pad slowly, working around the edge instead of yanking it.
- Wipe the mounting area to remove dust and residue.
- Line up the new pad with the ear cup.
- Press evenly all the way around until it sits firmly in place.
- Repeat on the other side.
- Check the result: no wrinkles, no raised edges, both sides matching.
🧯 If something looks off
- It sits crooked: check you have the right side and press it flat again.
- There's a wrinkle: lift that spot, smooth it out and press down gently.
- An edge sticks out: remove the pad and reseat it all the way around.
💡 Myths and Facts
Myth: "Uncomfortable headphones need replacing."
Fact: Often only the ear pads are worn, and they can be replaced on their own.
Myth: "All Audio-Technica ear pads are interchangeable."
Fact: Not necessarily. Always start from your exact model name.
Myth: "New pads will change the battery or Bluetooth."
Fact: No. They renew the part that touches your ear, nothing else.
Myth: "I only need to replace one side."
Fact: Both sides wear together. A pair keeps the fit balanced.
Myth: "It takes special tools."
Fact: You peel, you press, you're done. A few minutes, no tools.
📋 Compatibility & Details
- Headphone model: Audio-Technica ATH-SR30BT
- Material: PU leather
- Type: replacement ear pads / ear cushions (not original, wear part)
- Quantity: 1 pair (1 left + 1 right)
- Use: music, commuting, remote work, everyday
- Installation: quick, no tools
- Not included: the headphones
📦 What's in Your Order
You receive one pair of PU leather replacement ear pads (left and right) for the Audio-Technica ATH-SR30BT. The headphones are not included.
✔️ Check before you buy
- My headphones are the Audio-Technica ATH-SR30BT.
- The order covers both sides.
- The headphones still work, only the ear pads are worn.
- I haven't mixed it up with another ATH model.
⚠️ Common mistakes
- Ordering for a similarly named ATH model.
- Replacing only one side.
- Yanking the old pad off in one go.
- Cleaning with solvents or strong alcohol.
🧼 Caring for PU Leather Ear Pads
- Wipe regularly with a soft, slightly damp cloth.
- Avoid solvents and strong alcohol, which can damage the surface.
- Let the pads air dry fully before storing the headphones.
- Store them on a stand or in a case so the pads aren't crushed.
- Keep them away from heat, direct sun and radiators.
- Replace both pads as soon as wear or discomfort shows up.
♻️ Repair Instead of Throwing Away
With new ear pads for your Audio-Technica ATH-SR30BT, a good pair of headphones stays in use for a fraction of the cost of a new one, instead of ending up in the trash.
❓ FAQ: Audio-Technica ATH-SR30BT Ear Pads
Can I replace the ear pads on my ATH-SR30BT myself?
Yes. The fit is simple and needs no tools: you only replace the worn part.
Will these ear pads fit my Audio-Technica ATH-SR30BT?
Yes, they are made for the ATH-SR30BT. Still, double-check your exact model name before ordering.
What material are they made of?
PU leather. It is the only material offered for this model.
Are ear pads, ear cushions and earpads the same thing?
Yes. They are different names for the same part.
Do they fit the ATH-SR9BT or ATH-S200BT?
Not automatically. Each model has its own ear pads, so open the page for your exact headphones.
Are they original Audio-Technica parts?
No, they are compatible replacement ear pads.
Why replace the ear pads on headphones?
Over time they lose their shape and softness. Replacing them brings back comfort.
Will new pads change the sound or the features?
Material and thickness can slightly color the sound. The drivers, Bluetooth, battery, microphone and electronics stay as they are.
When should I replace them?
When the surface peels, the foam is flat, or your ears get sore. It depends on use, sweat and care.
How do I install them?
Peel off the old ones slowly, wipe the mounting area, line up the new ones and press evenly around the edge. The guide above covers each step.
Do I need any tools?
No, it's all done by hand.
Should I replace both sides?
Yes. They wear at the same rate, and a pair keeps the fit balanced.
How do I clean PU leather ear pads?
Use a soft, slightly damp cloth. Avoid solvents and strong alcohol, and always let them dry.
My headphones still work. Is it worth replacing only the ear pads?
Yes, that's the ideal case: you keep working headphones and renew only what's worn.
What comes in the order?
One pair of PU leather ear pads (left and right). The headphones are not included.
🎧 New Ear Pads for Your Audio-Technica ATH-SR30BT
Order the pair, fit it in a few minutes, and enjoy comfortable headphones again.
If you are not fully satisfied with an item purchased from our store, we will offer a quick and easy exchange or a full refund of the purchase price.
You have up to 30 days from the date you receive your order to make a return.
🚚 Free Tracked Shipping – Worldwide
We offer free tracked delivery on all orders, no matter where you are located.
Estimated delivery times:
- 🇺🇸 United States: 5–7 business days
- 🇬🇧 United Kingdom: 5–7 business days
- 🇨🇦 Canada: 5–7 business days
- 🇦🇺 Australia: 6–8 business days
- 🌍 Other countries: 6–10 business days
All orders are processed within 1–2 business days.
Tracking information is provided once your order has been shipped.
Free Returns & Refunds – 30 Days to Change Your Mind 🔄
You have 30 days after receiving your order to return your parcel at no extra cost.
We provide a free return label to make the process quick and easy.
With us, it’s simple and hassle-free: if you’re not satisfied, you get a full refund.
✅ Satisfaction guaranteed — no stress, no complications.
100% Secure Payment 💳🔒
We do everything possible to ensure the security of your transactions.
Our payment system is fully secure and compliant with international standards.
Shop with confidence — your personal and payment data are fully protected.
Why Choose Earpads-Headphones.com?
We focus exclusively on high-quality replacement ear pads. Our mission is simple: bring back comfort, restore sound and extend the life of your headphones — without the cost of replacing them.
- ✔ Secure checkout with Stripe & PayPal
- ✔ Not sure which pads fit? Our team helps you find the right model
- ✔ 100% satisfaction guarantee or your money back
Better comfort. Better sound. Longer headphone life.
RESTORE YOUR HEADPHONES ↑